--- title: "Getting Started" slug: "adding-a-device-general" updated: 2024-09-23T19:43:03Z published: 2024-09-23T19:43:03Z canonical: "docs.ai-op.com/adding-a-device-general" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.ai-op.com/llms.txt > Use this file to discover all available pages before exploring further. # Getting Started To create a new device, click on `Devices` using the side navigation bar and click the ellipses in the top right corner to reveal the device list dropdown. From here click the `+ Create Device` button. You will be taken to a device create form which contains the following parameters. ![](https://cdn.document360.io/9fab5c8f-2756-48da-b963-232bd8533649/Images/Documentation/image(37).png) #### Name The name should be a unique string identifier used to briefly describe this device. *i.e. Nitrogen Recovery PLC, Fan Controller #1* #### Description The description should be a more detailed string used to describe the device. *i.e. Allen Bradley Micrologix controller located in panel #4 in the north-west compressor building.* #### Protocol Use the dropdown list to select an available protocol that the end device is compatible with. #### Scan Rate Enter the interval in seconds that the device should attempt to read/write to the end device. > [!NOTE] > Faster than 1 second? > > The scan rate can be a floating point number. So to achieve a 100ms scan rate, simply enter 0.1 seconds.