--- title: "Creating an Ethernet/IP Device" slug: "creating-an-ethernetip-device" updated: 2024-09-23T16:05:54Z published: 2024-09-23T16:05:54Z canonical: "docs.ai-op.com/creating-an-ethernetip-device" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.ai-op.com/llms.txt > Use this file to discover all available pages before exploring further. # Creating an Ethernet/IP Device After [creating a device](/v1/docs/adding-a-device-general) and selecting the Ethernet/IP protocol, you will be expected to fill out the following fields: ![](https://cdn.document360.io/9fab5c8f-2756-48da-b963-232bd8533649/Images/Documentation/image(39).png) #### Ethernet/IP Hostname The IP address or hostname of the end device used to form a connection. #### Device Type Koios currently supports the following Ethernet/IP devices: - **Logix** - Able to communicate with any Allen Bradley PLC in the Logix family that is capable of Ethernet/IP communication. *Generic Ethernet/IP communication coming in a future release.* #### Connection Timeout The amount of time in seconds Koios will wait for a response before it considers the connection to the device as failed. ### Logix Settings If Logix is selected as the type, you will be taken to a Logix Device Update form with the following fieldsx: #### Controller Slot The physical slot of the controller in the Allen Bradley rack. > [!NOTE] > Slot 0 > > For devices with the controller built into the rack such as a MicroLogix, select slot 0.